Factory Supply Fiberglass Walkway Grating - Easily installed FRP GRP Walkway Platform System – WellGrid

Product Description

Stair Treads are made using 38mm FRP Anti-Slip Open Mesh Grating with yellow nosing.

Platforms are built from 38mm FRP Anti-Slip Open Mesh Grating with a SWL of 5kN/m2.

Continuous handrail on both sides has Kick Plate on the platform to prevent items falling or rolling off.

Supplied fully fabricated – we can break it down into sections to make it easier to lift if required.

Stair Tread and Platform are 800mm wide.

Long-lasting FRP will never rot or corrode and requires zero maintenance.

Chemical resistant, non-conductive and low noise.

Benefits

 • High strength composite construction

 • Dimensionally and thermally stable

• Manufactured to your individual specification

• Corrosion resistant

• Non-conductive

• Easily installed

• Maintenance-free

Application

FRP Walkway Platform most applications including:

• Roof-top access to private or government buildings

• Chemical Plants

• Water and Waste Treatment Plants

• Marine and Offshore

• Petrochemical

• Power Stations and Sub-Stations

Whether staff need to navigate across a single pipe, a boundary wall or a network of cables, a FRP Walkway Platform will ensure that they stay safe while preventing the pipes, walls or cables from getting kicked, stepped on or damaged. Built to suit each site, a FRP Walkway Platform can be made any height, width or length and is usually supplied ready-made. FRP is less than half the weight of the steel equivalent, so most FRP Walkway Platform can be placed manually – no heavy lifting equipment is required. It is also long-lasting and low-maintenance. Typically constructed using Standard Open Mesh Grating and stairs with a FRP handrail, they can be made to your own specifications.