Leading Manufacturer For Fibreglass Decking - HEAVY DUTY FRP Deck / Plank /Slab – WellGrid
Leading Manufacturer For Fibreglass Decking - HEAVY DUTY FRP Deck / Plank /Slab – WellGrid Detail:
Product Description
|
Uniform Load |
|||||
| Span mm | 750 | 1000 | 1250 | 1500 | 1750 |
| Deflection = L/200 | 3.75 | 5.00 | 6.25 | 7.50 | 8.75 |
| Load kg/m2 | 4200 | 1800 | 920 | 510 | 320 |
|
Concentrated Line Load |
|||||
| Span mm | 750 | 1000 | 1250 | 1500 | 1750 |
| Deflection = L/200 | 3.75 | 5.00 | 6.25 | 7.50 | 8.75 |
| Load kg/m2 | 1000 | 550 | 350 | 250 | 180 |
| Note: The above data has been calculated from measurements made of the full section modulus – EN 13706, Annex D. | |||||
FRP Decking is suitable as a cooling tower floor, for walkways, pedestrian bridge decks and odour control covers or to keep out water penetration in potable and waste water treatment units.
FRP Decking can be used in a number of other applications where its strength, light weight and easy of joining, no theft value, provide important benefits to our final clients.
|
No. |
Width(mm) |
Height(mm) |
Weight(g/m) |
Drawing |
|
D305 |
305 |
54 |
5400 |
|
|
D424D |
424 |
38 |
7000 |
|
|
D500HD |
500 |
40 |
9450 |
|
|
D500MD |
500 |
40 |
7300 |
 |
D500HD Loading tech data
|
Deflection (mm) |
Concentrated Line Load （Kg） |
||||||||
|
150kg |
250kg |
350kg |
500kg |
600kg |
750kg |
1000kg |
L/200 |
L/100 |
|
|
Span(mm) |
Kg |
||||||||
|
300 |
0.03 |
0.06 |
0.08 |
0.11 |
0.13 |
0.17 |
0.22 |
* |
* |
|
500 |
0.15 |
0.26 |
0.36 |
0.52 |
0.62 |
0.77 |
1.03 |
2421 |
4843 |
|
700 |
0.42 |
0.71 |
0.99 |
1.42 |
1.70 |
2.12 |
2.83 |
1235 |
2471 |
|
1000 |
1.24 |
2.06 |
2.89 |
4.13 |
4.96 |
605 |
1211 |
||
|
1200 |
2.14 |
3.57 |
5.00 |
7.14 |
420 |
841 |
|||
|
1500 |
4.18 |
6.97 |
9.76 |
269 |
538 |
||||
|
1700 |
6.09 |
10.15 |
209 |
419 |
|||||
|
2000 |
9.91 |
151 |
303 |
||||||
|
Deflection (mm) |
Uniform Load （Kg/M2） |
||||||||
|
150kg |
250kg |
350kg |
500kg |
600kg |
750kg |
1000kg |
L/200 |
L/100 |
|
|
Span(mm) |
Kg |
||||||||
|
300 |
0.00 |
0.01 |
0.01 |
0.01 |
0.01 |
0.02 |
0.02 |
* |
* |
|
500 |
0.02 |
0.04 |
0.06 |
0.08 |
0.10 |
0.12 |
0.16 |
* |
* |
|
700 |
0.09 |
0.15 |
0.22 |
0.31 |
0.37 |
0.46 |
0.62 |
5647 |
* |
|
1000 |
0.39 |
0.65 |
0.90 |
1.29 |
1.55 |
1.94 |
2.58 |
1937 |
3874 |
|
1200 |
0.80 |
1.34 |
1.87 |
2.68 |
3.21 |
4.01 |
5.35 |
1121 |
2242 |
|
1500 |
1.96 |
3.27 |
4.57 |
6.53 |
574 |
1148 |
|||
|
1700 |
3.23 |
5.39 |
7.55 |
394 |
789 |
||||
|
2000 |
6.19 |
242 |
484 |
||||||
Product detail pictures:
Related Product Guide:
We believe in: Innovation is our soul and spirit. Top quality is our life. Purchaser need is our God for Leading Manufacturer For Fibreglass Decking - HEAVY DUTY FRP Deck / Plank /Slab – WellGrid , The product will supply to all over the world, such as: Luxemburg, Kazakhstan, Albania, We have now 48 provincial agencies in the country. We also have stable cooperation with several international trading companies. They place order with us and export solutions to other countries. We expect to cooperate with you to develop a larger market.
By Joanne from Morocco - 2017.05.02 18:28
The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
By Astrid from Thailand - 2017.08.16 13:39
Related products
-
Factory Low Price Fiberglass Patio Deck - HEAV...
Product Description Uniform Load Span mm 750 1000 1250 1500 1750 Deflection = L/200 3.75 5.00 6.25 7.50 8.75 Load kg/m2 4200 1800 920 510 320 Concentrated Line Load Span mm 750 1000 1250 1500 1750 Deflection = L/200 3.75 5.00 6.25 7.50 8.75 Load kg/m2 1000 550 350 250 180 Note: The above data has been calculated from measurements made of the full section modulus – EN 13706, Annex D. FRP Decking is suitable as a cooling tower floor, for walkways, pedestrian brid...
-
Professional China Slip Resistant Stair Treads ...
Product Description ►Our fiberglass stair nosing and strip reach R13 rating of anti-slip; ►Coated with high grade epoxy vinyl ester resin; ►We supply fine, medium and coarse grits all with aluminium oxide type; ►We supply black, yellow, white, green, red, grey colors; ►Available in 3600mm length or cut to required size; ►Guarantee for 5 years under normal conditions; ►Could be fixed using an adhesive or by drilling and screwing (For open mesh grating, stainless steel clamps are available...
-
China Factory For Structural Fiberglass Square ...
Hand Layup Process Gel coating Gel coating gives you the smoothness required for the product. It is usually a thin layer of resin that is about 0.3 mm on the surface of the product. Adding proper pigments to the resin, and the color is custom available. The gel coating forms a protective layer to protect the products from contacting with water and chemicals. If it is too thin, the fiber pattern will become visible. If it is too thick, there will be crazing and star cracks on the product’s sur...
-
Factory Low Price Frp Structure Cooling Tower -...
Hand Layup Process Gel coating Gel coating gives you the smoothness required for the product. It is usually a thin layer of resin that is about 0.3 mm on the surface of the product. Adding proper pigments to the resin, and the color is custom available. The gel coating forms a protective layer to protect the products from contacting with water and chemicals. If it is too thin, the fiber pattern will become visible. If it is too thick, there will be crazing and star cracks on the product’s sur...
-
Fast Delivery Molded Fiberglass Grating - Hig...
FRP Pultruded Grating Availability No. Type Thickness (mm) Open area (%) Bearing Bar Dimensions (mm) Center line distance Weight (kg/m2) Height Width top Wall thickness 1 I-4010 25.4 40 25.4 15.2 4 25.4 18.5 2 I-5010 25.4 50 25.4 15.2 4 30.5 15.8 3 I-6010 25.4 60 25.4 15.2 4 38.1 13.1 4 I-4015 38.1 40 38.1 15.2 4 25.4 22.4 5 I-5015 38.1 50 38.1 15.2 4 30.5 19.1 6 I...
-
OEM Customized Fiberglass Rectangular Tube - F...
Hand Layup Process Gel coating Gel coating gives you the smoothness required for the product. It is usually a thin layer of resin that is about 0.3 mm on the surface of the product. Adding proper pigments to the resin, and the color is custom available. The gel coating forms a protective layer to protect the products from contacting with water and chemicals. If it is too thin, the fiber pattern will become visible. If it is too thick, there will be crazing and star cracks on the product’s sur...
