New Delivery For Fiberglass Deck Resurfacing - HEAVY DUTY FRP Deck / Plank /Slab – WellGrid
New Delivery For Fiberglass Deck Resurfacing - HEAVY DUTY FRP Deck / Plank /Slab – WellGrid Detail:
Product Description
|
Uniform Load |
|||||
| Span mm | 750 | 1000 | 1250 | 1500 | 1750 |
| Deflection = L/200 | 3.75 | 5.00 | 6.25 | 7.50 | 8.75 |
| Load kg/m2 | 4200 | 1800 | 920 | 510 | 320 |
|
Concentrated Line Load |
|||||
| Span mm | 750 | 1000 | 1250 | 1500 | 1750 |
| Deflection = L/200 | 3.75 | 5.00 | 6.25 | 7.50 | 8.75 |
| Load kg/m2 | 1000 | 550 | 350 | 250 | 180 |
| Note: The above data has been calculated from measurements made of the full section modulus – EN 13706, Annex D. | |||||
FRP Decking is suitable as a cooling tower floor, for walkways, pedestrian bridge decks and odour control covers or to keep out water penetration in potable and waste water treatment units.
FRP Decking can be used in a number of other applications where its strength, light weight and easy of joining, no theft value, provide important benefits to our final clients.
|
No. |
Width(mm) |
Height(mm) |
Weight(g/m) |
Drawing |
|
D305 |
305 |
54 |
5400 |
|
|
D424D |
424 |
38 |
7000 |
|
|
D500HD |
500 |
40 |
9450 |
|
|
D500MD |
500 |
40 |
7300 |
 |
D500HD Loading tech data
|
Deflection (mm) |
Concentrated Line Load （Kg） |
||||||||
|
150kg |
250kg |
350kg |
500kg |
600kg |
750kg |
1000kg |
L/200 |
L/100 |
|
|
Span(mm) |
Kg |
||||||||
|
300 |
0.03 |
0.06 |
0.08 |
0.11 |
0.13 |
0.17 |
0.22 |
* |
* |
|
500 |
0.15 |
0.26 |
0.36 |
0.52 |
0.62 |
0.77 |
1.03 |
2421 |
4843 |
|
700 |
0.42 |
0.71 |
0.99 |
1.42 |
1.70 |
2.12 |
2.83 |
1235 |
2471 |
|
1000 |
1.24 |
2.06 |
2.89 |
4.13 |
4.96 |
605 |
1211 |
||
|
1200 |
2.14 |
3.57 |
5.00 |
7.14 |
420 |
841 |
|||
|
1500 |
4.18 |
6.97 |
9.76 |
269 |
538 |
||||
|
1700 |
6.09 |
10.15 |
209 |
419 |
|||||
|
2000 |
9.91 |
151 |
303 |
||||||
|
Deflection (mm) |
Uniform Load （Kg/M2） |
||||||||
|
150kg |
250kg |
350kg |
500kg |
600kg |
750kg |
1000kg |
L/200 |
L/100 |
|
|
Span(mm) |
Kg |
||||||||
|
300 |
0.00 |
0.01 |
0.01 |
0.01 |
0.01 |
0.02 |
0.02 |
* |
* |
|
500 |
0.02 |
0.04 |
0.06 |
0.08 |
0.10 |
0.12 |
0.16 |
* |
* |
|
700 |
0.09 |
0.15 |
0.22 |
0.31 |
0.37 |
0.46 |
0.62 |
5647 |
* |
|
1000 |
0.39 |
0.65 |
0.90 |
1.29 |
1.55 |
1.94 |
2.58 |
1937 |
3874 |
|
1200 |
0.80 |
1.34 |
1.87 |
2.68 |
3.21 |
4.01 |
5.35 |
1121 |
2242 |
|
1500 |
1.96 |
3.27 |
4.57 |
6.53 |
574 |
1148 |
|||
|
1700 |
3.23 |
5.39 |
7.55 |
394 |
789 |
||||
|
2000 |
6.19 |
242 |
484 |
||||||
Product detail pictures:
Related Product Guide:
In order to give you convenience and enlarge our business, we also have inspectors in QC Team and assure you our best service and product for New Delivery For Fiberglass Deck Resurfacing - HEAVY DUTY FRP Deck / Plank /Slab – WellGrid , The product will supply to all over the world, such as: United States, Colombia, Zambia, Our products are mainly exported to Southeast Asia, the Middle East, North America and Europe. Our quality is surely guaranteed. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
By Elva from Turin - 2018.10.31 10:02
It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
By Sabrina from Lyon - 2018.09.19 18:37
Related products
-
OEM Manufacturer Fibreglass Walkway Grating - ...
Product Description Stair Treads are made using 38mm FRP Anti-Slip Open Mesh Grating with yellow nosing. Platforms are built from 38mm FRP Anti-Slip Open Mesh Grating with a SWL of 5kN/m2. Continuous handrail on both sides has Kick Plate on the platform to prevent items falling or rolling off. Supplied fully fabricated – we can break it down into sections to make it easier to lift if required. Stair Tread and Platform are 800mm wide. Long-lasting FRP will never rot or corrode and require...
-
Wholesale Price China Fiberglass Covered Gratin...
FRP Pultruded Grating Availability No. Type Thickness (mm) Open area (%) Bearing Bar Dimensions (mm) Center line distance Weight (kg/m2) Height Width top Wall thickness 1 I-4010 25.4 40 25.4 15.2 4 25.4 18.5 2 I-5010 25.4 50 25.4 15.2 4 30.5 15.8 3 I-6010 25.4 60 25.4 15.2 4 38.1 13.1 4 I-4015 38.1 40 38.1 15.2 4 25.4 22.4 5 I-5015 38.1 50 38.1 15.2 4 30.5 19.1 6 I...
-
Manufactur Standard Fiberglass Rods And Tubes -...
Hand Layup Process Gel coating Gel coating gives you the smoothness required for the product. It is usually a thin layer of resin that is about 0.3 mm on the surface of the product. Adding proper pigments to the resin, and the color is custom available. The gel coating forms a protective layer to protect the products from contacting with water and chemicals. If it is too thin, the fiber pattern will become visible. If it is too thick, there will be crazing and star cracks on the product’s sur...
-
China OEM Plastic Grating For Walkways - Easil...
Product Description Stair Treads are made using 38mm FRP Anti-Slip Open Mesh Grating with yellow nosing. Platforms are built from 38mm FRP Anti-Slip Open Mesh Grating with a SWL of 5kN/m2. Continuous handrail on both sides has Kick Plate on the platform to prevent items falling or rolling off. Supplied fully fabricated – we can break it down into sections to make it easier to lift if required. Stair Tread and Platform are 800mm wide. Long-lasting FRP will never rot or corrode and require...
-
2022 Wholesale Price Angled Stair Treads - FRP...
Product Description ►Our fiberglass stair nosing and strip reach R13 rating of anti-slip; ►Coated with high grade epoxy vinyl ester resin; ►We supply fine, medium and coarse grits all with aluminium oxide type; ►We supply black, yellow, white, green, red, grey colors; ►Available in 3600mm length or cut to required size; ►Guarantee for 5 years under normal conditions; ►Could be fixed using an adhesive or by drilling and screwing (For open mesh grating, stainless steel clamps are available...
-
One Of Hottest For Fibreglass Square Tube - FR...
Hand Layup Process Gel coating Gel coating gives you the smoothness required for the product. It is usually a thin layer of resin that is about 0.3 mm on the surface of the product. Adding proper pigments to the resin, and the color is custom available. The gel coating forms a protective layer to protect the products from contacting with water and chemicals. If it is too thin, the fiber pattern will become visible. If it is too thick, there will be crazing and star cracks on the product’s sur...
